- 164 -
5. Fax
Prints received fax images on both sides of paper.
Use plain paper of a standard size. Use of paper other than paper of standard sizes may cause paper jams.
Loading Paper (User's Manual)
1
Press the (SETTING) button on the operator panel.
2
Press the button once to select [Admin Setup] and press the button.
3
Enter the administrator password, and then press the (OK) button.
The factory default administrator password is "999999". If the administrator password is changed, enter the
updated password.
4
Press the button to select [Fax Setup] and press the button.
5
Press the button to select [Other Settings] and press the button.
6
Press the or button to select [Duplex] and press the button.
7
Press the or button to select the value you want to set and press the
(OK) button.
Setting [Duplex] to [OFF] is for simplex printing.
8
Press the button until the home screen is displayed.
Available Printing Methods
• Duplex prints with the long edge bound
• Duplex prints with the short edge bound
Duplex Printing
To Next Page
Loading...
