- 79 -
4. Print
2
Remove the fuser unit from the machine.
For details, see "Replacing the Fuser Unit".
3
Attach the envelope lever to the fuser unit.
Press the jam release lever, and then insert the envelope lever into the nearby hole.
Push the lever to lock.
4
Replace the fuser unit to the machine.
For details, see "Replacing the Fuser Unit".
Loading Envelopes
When printing on envelopes, change the paper size setting, and use the MP tray and rear
output tray.
1
Load envelopes until their edges touch the paper feed entrance with the print
side up.
2
Open the rear output tray.
3
Press the (SETTING) button on the operator panel.
4
Press the button to select [Paper Setup] and press the button.
5
Press the button to select [MP Tray] and press the button.
6
Check that [Paper Size] is selected, and then press the button.
7
Press the or button to select the envelope to use and press the (OK)
button.
8
Press the button until the home screen is displayed.
Available envelope types.
Loading Paper (User's Manual)
For Windows PCL Printer Driver
1
Open the file to print.
2
Select [Print] from the [File] menu.
3
Click [Preferences].
Possible to get burned.
Since the fuser unit gets hot, carry out the operation carefully, and when lifting it up you
must hold it by the handle. Do not try to hold it whilst it is hot. Wait until it has cooled
down and then carry out the operation.
Com-9, Com-10, DL, C5, Monarch
To Next Page
Loading...
Need help?
General
