Olivetti PR4 SR - Page 5

viService ManualXYAA6336
6. ADJUSTMENTS ........................... 6-1
6.1 ADJUSTING THE PLATEN
ON THE BASIC STRUCTURE ...... 6-1
6.2 ADJUSTING THE PARALLELISM
AND PRINT HEAD-PLATEN
DISTANCE..................................... 6-2
6.3 ADJUSTING THE TENSION
OF THE CARRIAGE TRANSPORT
BELT .............................................. 6-2
6.4 ADJUSTING THE OUT OF
JOURNAL AND RECEIPT PAPER
MICROSWITCH SUPPORT .......... 6-2
6.5 MOUNTING THE SNAP RINGS
ON THE CARRIAGE TRANSPORT
ASSEMBLY.................................... 6-2
6.6 ADJUSTING THE CLEARANCE OF
THE DOCUMENT INSERTION
SLOT ............................................. 6-3
6.7 ADJUSTING THE PAPER
DETECTION PHOTOSENSOR ..... 6-4
6.8 ADJUSTING THE MICR MOTOR
ASSEMBLY MESH ........................ 6-5
6.9 ADJUSTMENT MENU ................... 6-6
6.9.1 Photosensor Adjustments ....... 6-7
6.9.2 Adjusting the Carriage ............. 6-9
6.9.3 MICR Adjustment..................... 6-11
7.LUBRIFICATION.............................7-1
8. INSTALLING THE DRAWER AND
DISPLAY CARD OPTION ............ 8-1