Omicron CPC 100 User Manual

CPC 100 V 3.20
Introduction - 6
Introduction
Network
Setting the communication parameters.
Display
Date / Time
Set date and time.
Regional Settings
Regional setting for language, temperature unit, date and time style. These settings affect the
way the CPC 100 software displays and sort dates, times, numbers and decimal points.
DHCP / Auto-IP
Configures all communication
parameters automatically; the DHCP
server will do it for you or it will be done
via the Auto-IP mechanism.
The data entry fields for IP address,
Subnet Mask, Default Gateway and
DNS are read-only, no data can be
entered. This is the recommended
setting.
Static IP
Configure the communication
parameters manually by entering the
values into the data entry fields using the
soft-touch keys.
Sliding regulator to adjust the display
contrast.
Set system date.
Complete the steps below to set the
system time:
► Put the focus onto the Time:
field using the handwheel.
► Use the Up/Down keys to
select between hours,
minutes and seconds.
► Turn the handwheel to
increase or decrease the
value.
► Press the handwheel to
acknowledge your entry.
Define system language
Define temperature unit °C or °F
Define the display style for date and
time
The Options Menu

Omicron CPC 100 Specifications

General

Brand	Omicron
Model	CPC 100
Category	Test Equipment
Language	English