1-6 Menus
1-6-2 Pop-up Menus
Other Components
Pop-up menu Description Offline Online
Parameter Edit Edits the selected PLC’s parameters. OK No
Load Reads the selected PLC’s parameters from
a file.
OK No
Save Saves the selected PLC’s parameters. OK OK
Toggle Position Moves a component’s icon above or below
the network line.
OK No
Copy Copies the selected PLC. OK No
Paste Pastes the selected PLC in the network. OK No
Delete Deletes the selected PLC. OK No
Edit Name Changes the selected PLC’s name. OK No
Edit Node Address Edits the selected PLC’s node address. OK No
Start Special
Application
Start with
Settings
Inherited
Starts the associated application while
keeping the PLC model settings.
OK OK
Start Only Starts the associated application
(CX-Thermo for a Temperature Controller).
OK OK
DeviceNet Networks
Sub-menu/command Description Offline Online
Wizard Enables setting device parameters with a
wizard (for supported devices only).
OK OK
Edit Enables editing device parameters. OK OK
Load Loads parameters from a device parameter
file.
OK OK
Save Saves device parameters to a file.
OK OK
Upload Uploads device parameters from a device on
the network.
No OK
Download Downloads device parameters to a device on
the network.
No OK
Parameter
Compare Compare device parameters with the
parameters in a device on the network.
No OK
Monitor Enables monitoring a device on the network
(supported devices only).
No OK
1-42