1-6 Menus
1-6-2 Pop-up Menus
Sub-menu/command Description Offline Online
Reset Resets a device on the network. No OK
Maintenance information Displays the maintenance information for the
selected device.
OK OK
Resister to another device Registers the current device to the scan list in
another device.
OK OK
Export Comment list Exports I/O comments in CSV format
(supported devices only).
OK OK
NX-Server DDE
Setup File
Scan list information is output in the
NX-Server DDE Edition file format.
OK OK
NX-Server ONC
Setup File
Scan list information is output in the
NX-Server ONC Edition file format.
OK OK
ONC DRM Unit
Setup File
Scan list information is output in the ONC
Master parameter file format.
OK OK
Cut Cuts the selected device. OK No
Copy Copies the selected device. OK No
Paste Pastes the device on the clipboard. OK No
Delete Deletes the selected device. OK No
Change Node Address Changes the selected device’s node address. OK No
Change Device Comment Changes the selected device’s description
(comment).
OK No
I/O Comment Enables editing I/O comments. OK No
Start with
Settings
Inherited
Starts the associated application while
keeping the PLC model settings. OK OK
Start Special
Application
Start Only Starts the associated application. OK OK
Properties Displays the properties of the device. OK OK
1-43
To Next Page
Loading...
Need help?
General