Omron FHV7 series User Manual

2 Click the Switch Screen button to display line 1 (Non-stop Adjustment Mode Window).
The display for line 0 changes to the display for line 1. (The main display for line 1 is called the
Non-stop Adjustment Mode Window.) This display change will not stop the measurements on
images input to line 0.
3
Click the icon portion of the processing unit to adjust.
To change the flow, use the Edit flow tool in the Toolbox Pane.
The settings dialog box for the selected unit is displayed.
4
Modify the processing units.
5
Click OK.
The settings dialog box closes and the display returns to the Main Window (layout 1).
If you need to modify the judgement conditions for more than one processing unit, repeat steps
3 to 4.
At this stage, none of the changes have been applied.
6 In the Main Window for line 1, select Non-stop data transfer from the Function menu.
The changes to the settings for line 1 are saved as the settings for line 0 without affecting the
measurement.
7 Click the Switch Screen button to display the Main Window for line 0.
8 Click Data Save in the Function menu to save the settings.
4 Setting the Controller
4 - 24
FH/FHV Series Vision System User’s Manual (Z365-E1)

Omron FHV7 series Specifications

General

Brand	Omron
Model	FHV7 series
Category	Machine Vision Systems
Language	English