Omron FHV7 series User Manual

Processing item
Sup-
port
Processing item
Sup-
port
Processing item
Sup-
port
Sensitive Search OK Calculation OK Parallel Data Output OK
ECM Search OK Line Regression OK Parallel Judgement Output OK
EC Circle Search OK Circle Regression OK Fieldbus Data Output OK
EC Corner OK Precise Calibration OK Result Display OK
EC Cross OK User Data OK Display Image File OK
Shape Search II OK Set Unit Data OK Display Last NG Image OK
Classification OK Get Unit Data OK OCR OK
Edge Position OK Set Unit Figure OK OCR User Dictionary OK
Edge Pitch OK Get Unit Figure OK Conveyor Calibration OK
Scan Edge Position OK Trend Monitor - Conveyor Panorama Dis-
play
-
Scan Edge Width OK Image Logging OK Photometric Stereo Image
Input
OK
Circular Scan Edge Position OK Image Conversion Logging
RST
*
1
Display image hold OK
Circular Scan Edge Width OK Data Logging
RST
*
1
Conditional execution (If) OK
Color Data OK Elapsed Time OK Conditional execution (Else) OK
Gravity and Area OK Wait OK Loop OK
Labeling OK Focus OK Loop suspension OK
Label Data OK Iris OK Scene OK
Defect OK Unit Macro OK Select execution (Select) OK
Precise Defect OK Unit Calculation Macro OK Select execution (Case) OK
Fine Matching OK Parallelize OK System information OK
Character Inspection OK Parallelize Task OK Manual Position Setting -
Date Verification OK Statistics - 2DCode II OK
Model Dictionary OK Calibration Data Reference OK Result output (I / O) OK
2D Codes OK Position Data Calculation OK Result output (Message) OK
Circle Angle OK Stage Data OK Search II OK
Shape Search III OK Robot Data OK Result output (Parallel I / O) OK
Intersection OK Vision Master Calibration -
Barcode OK PLC Master Calibration -
Glue Bead Inspection OK Transfer Position Data OK
Position Compensation OK Calc Axis Move OK
Filtering OK Calc Axis Move by Multi-
point
OK
Back Ground Suppression OK Detection Point OK
Brightness Correct Filter OK Camera Calibration OK
Color Gray Filter OK Data Save OK
*1. Re-measured images in Non-Stop Adjustment Mode are logged.
*2. The Subt./Reg. and DI Register measurement modes are not supported.
*3. Sensor Controller in Non-Stop Adjustment Mode does not stand by.
4 Setting the Controller
4 - 26
FH/FHV Series Vision System User’s Manual (Z365-E1)

Omron FHV7 series Specifications

General

Brand	Omron
Model	FHV7 series
Category	Machine Vision Systems
Language	English