Menu Tables
426
FQ2 User’s Manual
TF settings
Information Used to check the Touch Finder informa-
tion.
--- System p. 230
Model Used to check the Touch Finder model. --- ---
Version Used to check the software version of
the Touch Finder.
--- p. 230
MAC address Used to check the MAC address of the
Touch Finder.
---
Memory state Used to check the Touch Finder memory
state.
--- p. 230
Error history View his-
tory
Displays a history of errors that have
occurred in the Touch Finder.
--- System p. 399
Delete
history
Deletes the error history. ---
Battery level Used to check the battery level. --- --- p. 230
File format
Logging image file
File name prefix You can set a character string to add to
the beginning of the file name for logged
data.
--- --- p. 211
Logging data file
File name prefix
Output format Used to set the output format for output
log data to a file.
--- --- p. 212
Field sep-
arator
None, Comma (default), Tab, Space,
Colon, Semicolon, CR, or CR+LF
---
Decimal
symbol
None, Point (default), or Comma ---
Record
separator
None, Comma, Tab, Space, Colon,
Semicolon, CR, or CR+LF (default)
---
SD card SD card
informa-
tion
Displays the capacity and remaining
memory in the SD card.
--- --- p. 222
Format Formats an SD card. --- --- p. 222
Startup dis-
play
Startup
screen
type
You can select the display to appear on
the Touch Finder when more than one
Sensor is connected.
Multi Sensor, NG sensor, Single sensor,
Auto (default)
--- p. 206
Specify
sensor
You can specify one Sensor to connect
to the Touch Finder.
ON, OFF (default) --- p. 225
Display
pattern
Sets the display to use in Run Mode. Graphic, Graphics + Details, All results/
Region, Statistical data, Trend monitor,
Histogram
System p. 183,
p. 225
Display
update
mode
Sets the image to update in Run Mode. Latest image, Last NG image p. 201
LCD back-
light
Bright-
ness
Sets the brightness. 0 to 5 System p. 202
ECO
mode
Enables (ON) or disables (OFF) ECO
Mode.
ON, OFF System p. 202
Menu command Description Setting range Data Refer-
ence