Oracle Database Appliance X6-2-HA Service Manual

4
♦ ♦ ♦ C H A P T E R 4
Servicing CRUs That Require Server Node
Power Off
These sections describe how to service customer-replaceable units (CRUs) for the Oracle
Database Appliance that require you to power off the server node. All of these CRUs are
located on the server nodes.
Note - The servicing of hot-plug components such as the HDDs, SDDs, power supplies, and
fans is described in Chapter 3, “Servicing CRUs That Do Not Require System Power Off”.
■
“Servicing Oracle Database Appliance X7-2 Series CRUs” on page 101
■
“Servicing Oracle Database Appliance X6-2 Series CRUs” on page 102
■
“Servicing Oracle Database Appliance X3-2/X4-2/X5-2 CRUs” on page 103
■
“Servicing Oracle Database Appliance Version 1 CRUs” on page 104
Servicing Oracle Database Appliance X7-2 Series CRUs
This section describes how to service customer-replaceable units (CRUs) for Oracle Database
Appliance X7-2 series.
If you have Oracle Database Appliance X6-2 series, go to “Servicing Oracle Database
Appliance X6-2 Series CRUs” on page 102. If you have Oracle Database Appliance
X3-2/X4-2/X5-2, go to “Servicing Oracle Database Appliance X3-2/X4-2/X5-2
CRUs” on page 103. If you have Oracle Database Appliance Version 1, go to “Servicing
Oracle Database Appliance Version 1 CRUs” on page 104.
Note - When adding DIMMs to the system, refer to the "Optional Component Installation"
section in the Owner's Guide for supported configurations.
Chapter 4 • Servicing CRUs That Require Server Node Power Off 101

Oracle Database Appliance X6-2-HA Specifications

General

Brand	Oracle
Model	Database Appliance X6-2-HA
Category	Storage
Language	English