Power Off the System
The server node shuts down immediately.
Caution - Data loss. To avoid data loss and file system corruption, use graceful shutdown
unless it is an emergency.
Power Off the System
Note - Information in this appendix does NOT apply to Oracle Database Appliance X3-
2, Oracle Database Appliance X4-2, Oracle Database Appliance X5-2 or Oracle Database
Appliance X6 series. Refer to the preceding chapters in this document for information on
servicing those systems.
The appliance database must be shut down before powering off the system chassis.
1.
Shut down both server nodes.
Shutting down both server nodes places the system in standby power mode.
See “Shut Down a Server Node” on page 143.
2.
Disconnect the AC power cords from the system.
Disconnecting the power cords from the system removes all power from the system.
Performing Electrostatic Discharge and Antistatic
Prevention Measures
Note - Information in this appendix does NOT apply to Oracle Database Appliance X3-
2, Oracle Database Appliance X4-2, Oracle Database Appliance X5-2 or Oracle Database
Appliance X6 series. Refer to the preceding chapters in this document for information on
servicing those systems.
Electrostatic discharge (ESD) sensitive devices, such as the motherboards, PCIe cards, storage
drives, and memory cards, require special handling.
Caution - Equipment damage. Follow antistatic precautions and do not touch the components
along their connector edges.
146 Oracle Database Appliance Service Manual • November 2017
To Next Page
Loading...
Need help?
General