EasyManuals Logo

Oracle Database Appliance X6-2-HA Service Manual

Oracle Database Appliance X6-2-HA
300 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #126 background imageLoading...
Page #126 background image
Powering On an Oracle Database Appliance That Includes a Storage Shelf
Powering On an Oracle Database Appliance That Includes a
Storage Shelf
This section describes how to restore power after servicing an Oracle Database Appliance that
includes at least one storage shelf (DE2-24P, DE2-24C, or DE3-24C). If you have an Oracle
Database Appliance X7-2S/X7-2M, X6-2S/X6-2M/X6-2L or Oracle Database Appliance
Version 1, your system does not support a storage shelf and you should skip this section.
If you haven't already, return the Oracle Database Appliance to operational status. If you have
Oracle Database Appliance X7-2-HA, go to “Returning Oracle Database Appliance X7-2
Series to Operation” on page 123. If you have Oracle Database Appliance X6-2-HA, go to
“Returning Oracle Database Appliance X6-2 Series to Operation” on page 124. If you have
Oracle Database X3-2/X4-2/X5-2, go to “Returning Oracle Database Appliance X3-2/X4-2/
X5-2 to Operation” on page 125.
When powering on the system, each server node is powered on separately.
Power On Procedure
Perform the following procedure to power on the Oracle Database Appliance.
1.
If you powered off and disconnected the power cords from a storage shelf (and
storage expansion shelf if one is present), reconnect the power cords now.
2.
Power on the storage shelf (and storage expansion shelf if one is present) by
switching the power supply On/Off button on each power supply to the On
position.
The disks begin to initialize and the power supply LEDs light green. This can take several
minutes.
Note - Do not power on the server nodes until the disks on the storage shelf and storage
expansion shelf have initialized.
3.
If you powered off a server node, reconnect any unplugged power cords.
4.
Power on a server node on using one of the following methods:
Press the recessed Power button on the server node front panel.
Log in to the Oracle ILOM web interface, click Host Management > Power Control, and
select Power On from the Select Action list box.
126 Oracle Database Appliance Service Manual • November 2017

Table of Contents

Other manuals for Oracle Database Appliance X6-2-HA

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Oracle Database Appliance X6-2-HA and is the answer not in the manual?

Oracle Database Appliance X6-2-HA Specifications

General IconGeneral
BrandOracle
ModelDatabase Appliance X6-2-HA
CategoryStorage
LanguageEnglish

Related product manuals