Access BIOS Setup Utility Menus
Only options that can be modified are highlighted when you press the up and down arrow keys.
■ If a field can be modified, as you select the option, user instructions for
modifying the option appear in the right column of the screen.
■ If a field is a link to a sub-screen, instructions to press the Enter key to
access the sub-screen appear in the right column.
7.
Modify the setup field and press the Esc key to save the changes and exit the
screen.
Some screens present a confirmation dialog box that enables unwanted changes to be retracted.
8.
On sub-screens that only provide configuration information and cannot be
modified, press the Esc key to exit the screen.
9.
To continue modifying other setup parameters, repeat Step 4 through Step 8.
Otherwise, go to Step 10.
10.
Press and release the right arrow key until the Exit menu screen appears.
11.
Follow the instructions on the Exit menu screen to save or discard your changes
and exit the BIOS Setup Utility.
BIOS Setup Utility Screens
Note - Information in this appendix does NOT apply to Oracle Database Appliance X3-
2, Oracle Database Appliance X4-2, Oracle Database Appliance X5-2 or Oracle Database
Appliance X6 series. Refer to the preceding chapters in this document for information on
servicing those systems.
This section describes the Oracle Database Appliance Version 1 BIOS setup utility screens. It
includes the following sections:
■
“BIOS Setup Utility Screen Overview” on page 274
■
“BIOS Main Menu Screen” on page 275
■
“BIOS Advanced Menu Screen” on page 276
■
“BIOS PCI Menu Screen” on page 277
■
“BIOS Boot Menu Screen” on page 278
Appendix A • Servicing the Oracle Database Appliance Version 1 273
To Next Page
Loading...
Need help?
General