Oracle Database Appliance X6-2-HA

Install Fan Power Cables
2.
Disconnect the fan power cables and remove them from the server node.
Install Fan Power Cables
Note - Information in this appendix does NOT apply to Oracle Database Appliance X3-
2, Oracle Database Appliance X4-2, Oracle Database Appliance X5-2 or Oracle Database
Appliance X6 series. Refer to the preceding chapters in this document for information on
servicing those systems.
This section describes installing the fan power cables in Oracle Database Appliance Version 1.
1.
Reconnect the fan power cables.
2.
Return the server node to operation.
a.
Install the server node top cover.
See “Installing the Server Node Top Cover” on page 245.
b.
Install the server node into the system.
See “Installing a Server Node Into the System Chassis” on page 246.
Appendix A • Servicing the Oracle Database Appliance Version 1 229