Install the Motherboard
9.
Install DIMMs on the motherboard.
Place each DIMM in the same motherboard slot where it had been before.
10.
Install the SPM on the motherboard.
Use the SPM you removed from a motherboard. See “Install the SPM” on page 123.
11.
Remove the eUSB device that comes with the new motherboard, and install it
onto the old motherboard.
Install the eUSB drive that you removed from the old motherboard onto the new motherboard.
See “Remove the eUSB Drive” on page 113 and “Install the eUSB Drive” on page 115.
12.
Install the SC PROM on the motherboard.
Use the SC PROM you removed from a motherboard.
13.
Install any memory risers.
140 SPARC T8-1 Server Service Manual • January 2022
To Next Page
Loading...
