Remove a Drive or Drive Filler
■
Cannot be logically isolated from the online operations of the server.
5.
Take one of the following actions:
■ To cold-service the drive, power off the server. Complete one of the
procedures described in “Removing Power From the Server” on page 45.
■ To hot-service the drive, take the drive offline using one of the procedures
in “Power Off the Server (Server Power Button - Graceful)” on page 47. This
action removes the logical software links to the drive and prevents any
applications from accessing it.
6.
If you are hot-servicing the drive, locate the drive that displays the amber Fault
LED and ensure that the blue Ready-to-Remove LED is lit.
7.
Attach an antistatic wrist strap.
8.
On the drive or drive filler you want to remove, complete the following tasks.
Servicing Drives 63
To Next Page
Loading...
Need help?
General