DigitalFlow™ DF868 Multipurpose Ultrasonic Liquid Flowmeter Programming Manual (2-Channel) 123
Appendix C. Programming with PanaView
Figure 33: Site Name Entry Window
3. The Site File Selection window (Figure 31 on page 122) opens. Highlight a site with the desired settings, and click
[Open]. PanaView saves the site in the meter with the new name and the desired settings.
C.6.5.3 Saving a Site to the PC
To save a site to the PC:
1. Highlight the desired site in the left pane. (See Figure 31 on page 122.)
2. Click Save Site to PC. A window opens similar to Figure 30 on page 121.
3. Enter the desired site name and click [Save]. PanaView saves the site in the PanaView folder unless otherwise
specified.
Note: If you have created a site on the meter after opening the Site File Operations window, you must close and
reopen the window to click on the new site.
To Next Page
Loading...
