Chapter 3. Logging Data
74 DigitalFlow™ DF868 Multipurpose Ultrasonic Liquid Flowmeter Programming Manual (2-Channel)
3.4.3 START DATE Prompt
11. Press [F1] to accept the displayed Start Date or press [F2] to enter a different start date. To start logging today,
press [F3].
• If OK or TODAY was selected, you have finished setting up the error log. Proceed to Procedure Options on the
next page.
• Otherwise, continue with the next prompt to Edit the Start Date.
a.
Enter the desired Year and press [ENT]. The acceptable range is 0 to 99.
b. Use the [, [ and [F1]-[F4] keys to select the desired Month.
c. Enter the desired Day and press [ENT]. The acceptable range is 1 to the number of days in the selected
month (28, 29, 30 or 31).
Procedure Options
You have completed setting up the error log. Do one of the following:
• Use [
and [ to review the previous menu prompts.
• Press [F1]-[F4] to select one of the submenus.
• To return to the data screen and begin logging data, press the [ENT] key. The * on the locator bar indicates that
the Model DF868 is now compiling the specified error log.
The error log will continue to run until it is manually stopped, the meter runs out of memory (for a non-circular log), or
the entire 120 records (2 pages x 60 records/page) have been logged.
To Next Page
Loading...
