DigitalFlow™ DF868 Multipurpose Ultrasonic Liquid Flowmeter Programming Manual (2-Channel) 135
Appendix E. OPC Server
Appendix E. OPC Server
E.1 Introduction
The Panametrics OPC Server can be used for communications with a flowmeter from process control or factory
automation OPC client software such as Simplicity, iFix, Iconics, etc.
E.2 Installation
This section describes the installation procedure for the OPC Server. Please refer to the system requirements listed
below before you proceed with installation.
E.2.1 System Requirements
Operating systems supported for this release are:
Windows® 2000
Windows® XP
Windows® 2003 Server
Note: For version 1.5, the configuration database is not backward-compatible.
The setup application also installs the Microsoft .NET 1.1 Framework. Microsoft releases .NET Framework Service Packs
that may improve security. You may upgrade .NET Framework from the Microsoft site:
http://msdn.microsoft.com/netframework/downloads/framework1_1/
http://www.microsoft.com/downloads/details.aspx?displaylang=
en&FamilyID=A8F5654F-088E-40B2-BBDB-A83353618B38
The XML-DA feature requires IIS 5.0 or higher. (If you do not install XML-DA, you will not need IIS.)
Windows NT 3.51 and NT 4.0 are not supported in this software release.
To Next Page
Loading...
