DigitalFlow™ DF868 Multipurpose Ultrasonic Liquid Flowmeter Programming Manual (2-Channel) 11
Chapter 1. Programming Site Data
The abbreviations and definitions of all the available totalizer units are shown in Table 3. The choices shown on the
option bar in the prompt screen above are determined by the selections made at the previous SYSTEM UNITS prompt
screen.
9. Press [F1]-[F4] to select the desired number of Totalizer Decimal Digits (digits to the right of the decimal point) in
the totalized flow display.
Table 3: Totalizer Units Options
English Totalizer Units Metric Totalizer Units
Gal - U.S. Gallons L - Liters
MGAL - Mega U.S. gallons ML - Megaliters
ft
3
- Cubic Feet m
3
- Cubic Meters
Mft
3
- Mega Cubic Feet Mm
3
- Mega Cubic Meters
BBL - Barrels BBL - Barrels
MBBL - Megabarrels MBBL - Megabarrels
Acre-inches
Acre-feet
To Next Page
