Chapter 4. Printing Data
82 DigitalFlow™ DF868 Multipurpose Ultrasonic Liquid Flowmeter Programming Manual (2-Channel)
Note: The Print Menu is not protected by the security feature and a password is never required to access this
menu.
2. Press [F3] = PROG.
3. Use the [
, [ and [F1]-[F4] keys to select the desired Site File to print.
Note: All site files currently in memory appear on the option bar. The currently active site file (or working file) is
always listed as the first choice (Work) on the option bar.
The Model DF868 returns to the standard data display screen and generates a site file printout similar to the one
shown in Figure 7. The printout continues until the entire file has been printed or until a STOP command is issued (see
the instructions for the STOP submenu on page 83).
Figure 7: A Typical Site File Printout
Supercompress?
Volumetric Units
Volumetric Time
VOL Decimal Digits
Pipe OD
.
Pipe Wall
Path Length
Axial Dimension L
PIPE PARAMETERS:
Transducer number
TOT Decimal Digits
.
.
Totalizer Units
SYSTEM PARAMETERS:
Totalizer Option
Equation
System Units
site LABEL site MESSAGE
ACTIVE PARAMETERS:
Site status
Skan/measure mode
Burst
Skan Only
ENGLISH
Automatic
Standard Equation
No
Thousands ACF
/min
0
Actual cubic ft
0
81
12.000 inches
0.200 inches
16.97 inches
12.00 inches
.
.
.
At 9:54:39 AM on 11 FEB 99
With 1K FIFO and 1113 receiver board.
Model GX868G3G
PROGRAM PARAMETERS of SITE NAME
To Next Page
Loading...
