37
Initializing a memory card (INIT)
Before using a memory card with the unit, be sure to initialize the
memory card with the unit
When the memory card is initialized, the memory card is formatted (in
compliance with SD standards) and dedicated directories are created
If you initialize a memory card, all of the files stored in the
memory card will be deleted
Be sure to execute initialization after confirming the data because
any data that is deleted by the initialization cannot be recovered
Note
1 Press the MENU button to turn on its indicator
2 Open SD DELETE menu [48]
DEL MO DE :RPDAT
3 Turn the F1 dial to display the “INIT” item, and then
press the F1 dial to confirm the selection
DEL MO DE :INIT
EXEC
4 Press the F2 dial
Initialization of the memory card begins
When no memory card is inserted, “NO CARD!” appears
INITIA LIZING
...
NOT RE MOVE CARD
COMPLE TE
When initialization completes, “COMPLETE” appears
When initialization fails, “INITIAL ERROR!” appears Replace the
memory card and then execute initialization again
Saving data to a memory card (SAVE)
1 Press one of the camera selection buttons
[CAMERA SELECT/GROUP SELECT] to select a remote
camera
2 Press the MENU button to turn on its indicator
3 Open SD SAVE menu [46]
SAVE MODE:RP DAT
4 Turn the F1 dial to select the type of data to save to the
memory card, and then press the F1 dial to confirm the
selection
The file name assigned automatically in accordance with the
selected data type is displayed on the second line of the LCD panel
SAVE M ODE:RPMEM
RP10.m12
You can select a data type from RPDAT, RPMEM, CAM, and LOG
However, when a remote camera connected via a serial
connection is selected, CAM and RPMEM cannot be selected
The name of the file to be saved cannot be changed from the unit
When no memory card is inserted, “NO CARD!” appears
Up to 99 files of each of RPDAT, RPMEM, CAM, and LOG can be
saved to one memory card
When 99 files already exist, “OVER 99FILES!” appears, and
saving is not possible
Delete files and then execute saving again
⇒ “Deleting the files saved to a memory card (DELETE)” (page 38)
5 Press the F2 dial to confirm the selection
Saving to the memory card begins
SAVING
...
NOT RE MOVE CARD
COMPLE TE
When saving completes, “COMPLETE” appears
When saving fails, “SAVE ERROR!” appears Replace the memory
card and then execute saving again
Memory card operations (continued)
To Next Page
Loading...
