38
Loading data from a memory card (LOAD)
1 Press one of the camera selection buttons
[CAMERA SELECT/GROUP SELECT] to select a remote
camera
2 Press the MENU button to turn on its indicator
3 Open SD LOAD menu [47]
LOAD M ODE:RPDAT
4 Turn the F1 dial to select the type of data to load from
the memory card, and then press the F1 dial to confirm
the selection
The file saved to the memory card is displayed on the second line of
the LCD panel
LOAD MODE:RP MEM
RP10. m12
You can select a data type from RPDAT, RPMEM, CAM, and UPG
However, when a remote camera connected via a serial
connection is selected, CAM and RPMEM cannot be selected
When no memory card is inserted, “NO CARD!” appears
5 Turn the F2 dial to select a file, and then press the F2
dial to confirm the selection
The data begins to be read from the memory card and transferred to
the unit or selected remote camera
When a file that cannot be loaded to the selected remote camera
is specified (when, for example, you specify a file of a remote
camera that is a different model), “LOAD ERROR!” appears
LOADIN G
...
NOT RE MOVE CARD
COMPLE TE
When loading completes, “COMPLETE” appears
When loading fails, “LOAD ERROR!” appears Save the data to
the memory card again and then execute loading again If loading
is still not possible, replace the memory card
When “UPG” is selected as the data type and then LOAD is
executed, the unit needs to be restarted after loading of the data
completes
Turn the unit’s power off and then back on
Note
Deleting the files saved to a memory card
(DELETE)
1 Press the MENU button to turn on its indicator
2 Open SD DELETE menu [48]
DEL MO DE :RPDAT
3 Turn the F1 dial to select the type of data to delete, and
then press the F1 dial to confirm the selection
The name of the file saved to the memory card is displayed on the
second line of the LCD panel
DEL MO DE :RPMEM
RP10.m12
You can select a data type from RPDAT, RPMEM, CAM, and LOG
For the operation when “INIT” is selected, refer to “Initializing a
memory card (INIT)” (page 37)
When no memory card is inserted, “NO CARD!” appears
4 Turn the F2 dial to select a file to delete, and then press
the F2 dial to confirm the selection
The file is deleted
COMPLE TE
When deleting completes, “COMPLETE” appears
When deleting fails, “DELETE ERROR!” appears Save any
necessary files to a computer and then initialize the memory card
Memory card operations (continued)
To Next Page
Loading...
