42
Returning the unit to the factory default
state
1 Press the MENU button
2 Open SYSTEM menu [49]
3 Turn the F1 dial to display the “1 INITIALIZE” item
1.INI TIALIZE
ALL
4 Turn the F2 dial to select “ALL” or “SETUP”, and then
press the F2 dial to confirm the selection
INITIALIZE is executed
ALL : Restores all settings to the factory default state (executes
INITIALIZE)
SETUP: Restores only some settings to the factory default state
(executes INITIALIZE)
The unit needs to be rebooted after selecting “ALL” and then
executing INITIALIZE Turn the power off and then back on
Note
Returning the unit to the factory default state (INITIALIZE) (continued)
To Next Page
Loading...
