The EM5625 wireless modem
Rev 0.21 Dec.04 11
System Select (roaming options)
Note: Change the setting ONLY if instructed to do so by your service
provider.
To change the roaming setting:
1. From the
Network tab of the Options window, use the
“
System select” drop-down list to select the option recom-
mended by your service provider.
·
Home Only - roaming is not allowed.
·
Home Preferred or Automatic - roam on “preferred” service
provider networks.
·
Automatic A - roaming is allowed on “preferred” service
provider networks and on non-preferred A-side
providers.
·
Automatic B - roaming is allowed on “preferred” service
provider networks and on non-preferred B-side
providers.
2. Click
OK to save the setting.
WiFi
The Watcher application also allows you to manage and
monitor connections with a WiFi network adapter.
Watcher overview
Watcher for the EM5625 wireless modem is the application
that allows you to manage and monitor the connection
between the EM5625 and the CDMA network.
Without running Watcher, you can make a VZAccess high-
speed data connection simply by launching whatever appli-
cation you want to use (such as your web browser or e-mail
application). Prerequisites: you must have previously enabled,
in Watcher, “Always-on” for the high-speed connection, and
• (If you have enabled auto-launch:) WiFi coverage is either
not available, or is available but no WiFi profiles have been
set to autoconnect.
However, to make use of other features of the EM5625, you
must run Watcher.
Watcher also allows you to manage and monitor connections
with a WiFi network adapter.
Explore:
To Next Page
Loading...
