Customization Options
Rev 0.21 Dec.04 91
Prompt before exit
When you close Watcher, there is a prompt reminding you that
any open connections will be closed and you cannot receive
any incoming voice calls.
To enable/disable this exit prompt:
1. From the
General tab of the Options window, select or clear
the “
Prompt before exit” check box. (The prompt will appear
when the box is checked.)
2. Click
OK to save the setting.
Data tab in Options
From the Data tab in the Options window, you can:
• Automatically disconnect inactive data calls
• Allow default connections only
• Disable network bindings
Disable Microsoft network bindings for VZAccess
connection
When the EM5625 is configured, bindings to Microsoft
network and file and printer sharing protocols are automati-
cally created. These bindings are not required and may create
additional over-the-air traffic, or cause security concerns.
These bindings can be disabled from the Windows Control
Panel or in Watcher. To disable the bindings in Watcher:
1. From the
Data tab of the Options window, select the
“Disable Microsoft network bindings for VZAccess connection”
check box.
2. Click
OK to save the setting.
Messaging tab in Options
From the Messaging tab in the Options window, you can
(subject to feature availability):
• Specify how long to keep read SMS messages in the Inbox
• Override your callback number on outgoing SMS
messages
• Select whether to save outgoing SMS messages to your
Outbox
• Enable or disable Enhanced SMS delivery acknowl-
edgement
• Change your Voice Mail access number
• Clear the Voice Mail icon
To Next Page
Loading...
