Voice Services
Rev 0.21 Dec.04 61
Related Topics:
>>| Dial a voice call
>>| Ending a voice call
>>| Headset / TTY use
>>| KeyGuard - prevent accidental dialing
Dial a voice call
Subject to feature availability.
A call can be dialed in several ways:
• Dial the number directly (from the
Voice tab of
Watcher)
• Use your Phone Book (in Watcher)
• Dial a contact from Outlook
• Redial the last number called or unanswered
• Select a number from the Call Log
• Call back the sender of a text message
Related Topics:
>>| Auto-Hyphenation feature
>>| Prefix dialing with “1”
>>| Auto-Retry feature
Manual dialing
You can enter a number in several ways:
• Select the numbers of the dial pad of the
Voice tab ,
much like the dial pad on a cellular phone.
• Use the number or letter keys of the keyboard. Letters
translate to the dial pad equivalents (A, B, or C = 2, and so
on).
To delete the last digit you entered (to make a correction), use
the
BACK button, or the backspace key.
To delete all the numbers you entered, use the
END
button or the
<esc> key.
Use
SEND , or the <enter> key, to initiate the call.
Auto-Hyphenation feature
The Auto-Hyphenation feature automatically inserts hyphens
into a phone number as you enter the digits. The number is
displayed in the format xxx-yyy-yyyy. The hyphens have no
effect on what is dialed.
To Next Page
Loading...
