Customization Options
Rev 0.21 Dec.04 93
>>| Minute Alert
Customize sounds
The .wav file assigned to each alert is shown.
To test the sound, select the
> button to the right of the event
description.
To change the sound file used:
1. Select the
Browse... button to right of the event description.
2. Navigate to the sound file (.wav) you want to use.
3. Select
Open in the file selection dialog.
4. Click
OK to save your settings.
For alerts and rings played on the wireless device’s speaker,
use the system volume control in the Windows system tray:
Voice tab in Options
From the Voice tab in the Options window, you can:
• Set the number of rings for the Auto-Answer feature
• Enable the Auto-Retry feature
• Enable the Any-Key Answer feature
• Enable the Auto-Hyphenation feature
• Prefix dialing with “1”
• Set the overdial tone length and mute the key tones
• Enable audible indicators for the length of your call
(Minute Alert) and change in coverage status (Service
Alert)
To Next Page
Loading...
