Online Help for VZW EM5625 NB
58 2130548
• Use the volume up and down buttons on the Voice tab
, or
• Move the slider in the
Sounds tab of the Options
window.
For alerts and rings played on the wireless device’s speaker,
use the system volume control in the Windows system tray:
Mute a call
To mute the microphone during a call, select the mute
button on the
Voice tab .
When your call is muted, the message “
Muted” flashes in the
Call status area.
The message is displayed until the call is ended, or until you
release it by selecting the mute button again.
Use a TTY
If you are using a TTY with your wireless device:
1. From the
Network tab of the Options window, use the “TTY
mode
” drop-down menu to select either:
·
Off - to use an approved headset, or
·
On (Full) - to use a TTY.
2. Click
Save.
Call Privacy
To prevent your voice calls from being monitored, the EM5625
automatically uses encryption where it is available on the
network in your current coverage area.
An icon in the Indicator area shows whether encryption (the
privacy feature) is on.
Minute Alert
The Minute Alert feature plays a sound in the headset at one-
minute intervals, allowing you to monitor the duration of your
call. This feature is useful if your billing plan includes a limited
number of minutes.
Encryption is on.
Encryption is off.
To Next Page
Loading...
