Panasonic CF-18 Series

Online Help for VZW EM5625 NB
78 2130548
1. Ensure you have NationalAccess service ( ) or an active
dial-up/Quick 2 NetSM (14.4kbps) connection ( ).
2. In Outlook, select the contact.
3. Select the
New SMS button .
4. If more than one phone number is associated with the
contact, a window appears listing all the numbers. Select
the number you want from the list and select the
Send SMS
button.
5. In the bottom part of the message composition window,
type your message.
(The maximum length of an SMS message is usually about
160 characters.)
6. Select the
Send button.
Alternatively, you can save the message (by selecting
File >
Save
), then edit and send it later.
To create and send an SMS message to a recipient who is not in
your contacts list, or to multiple recipients:
1. Ensure you have NationalAccess service ( ) or an active
dial-up/Quick 2 NetSM (14.4kbps) connection ( ).
2. In Outlook, select the
New SMS button .
3. In the
To field, enter the recipient's phone number.
—or—
Select
To to open the Add SMS Recipients window, which
allows you to select recipients from your contacts list:
a. Select a name in the list to display the person’s phone
number, then select the number and select the
Add
button to include the number in the Recipients list.
b. If you want to remove a number from the Recipients
list, select the number and select the
Remove button.
c. Repeat steps a and b until the Recipients list includes
all the numbers to which you want to send the
message.
Note: If the contacts listed in this window are not up-to-date with your
contact list in Outlook, select the Refresh button.
d. Select OK to close the Add SMS Recipients window.
4. In the bottom part of the message composition window,
type your message.
(The maximum length of an SMS message is usually about
160 characters.)