Panasonic CZ-256ESMC3 - Page 107

107
Displaying data in graphs
Energy saving
 Graph type/Data type
Type Bar Line Explanation
Graph
Plel*
1

Selected units or data are lined up horizontally, with one unit on the X axis.
Cumultve*
2

Data for selected units are stack, with one unit on the X axis.
SepUnt*
3

The X axis displays the units (10 units in ascending order of display).
Data
Max.*
4

The highest value of the selected item is used as the data.
Min.*
4

The lowest value of the selected item is used as the data.
Avge*
4

The average value of the selected item is used as the data.
SpcfTime

The value of the selected item from the specied time is used as the data.
*1 Display example (Parallel)
*2 Display example (Stack) *3 Display example (Unit)
*4 These can be set when “Mths” is selected as the display period.
 Item
The items you can set depend on the unit selected.
z Bar charts
Unit days Mths Yrs.
I/D
Ttl opr time (minutes)
T/S ON ope. time (minutes)
Ttl opr time (minutes) T/S ON ope. time (minutes)
Elec. usage (kWh) A/C gas usage (m
3
)
PowerGenratn gas usage (m
3
) ElectricCost
A/C gas cost PwrGnGasCost
O/D
O/D Unit opertn count (times) Engine operating time (minutes)
Invertr cuml power genrtn (kWh) PV cumulatve pwr generatn (kWh)
Pulse Incr. amount
Ar.
Ttl opr time (minutes)
T/S ON ope. time (minutes)
Ttl opr time (minutes) T/S ON ope. time (minutes)
Elec. usage (kWh) A/C gas usage (m
3
)
PowerGenratn gas usage (m
3
) ElectricCost
A/C gas cost PwrGnGasCost
z Line graphs
Unit days Mths
I/D un Set T. (°C) Room temp. (°C) DischrgeTemp (°C) Suction temp (°C)
O/D un
Outdoor temp (°C) Invertr inst power genrtn (kW)
PV InstPwGen (kW)
Note
y If you selected [By unit] as the display method, all items are displayed for the relevant units. (You cannot select the items)
Graph display function