114
Displaying data in graphs
Energy saving
5
Touch [DispItem set].
z The “DispItem set” screen is displayed.
5
6
Select how to display.
z Refer to P.106 for information about how to display.
6
(The following explains using examples as if “ItemUnts” was selected)
7
Select the unit.
z Refer to P.106 for information about units.
7
8
Select the type of data.
z Refer to P.107 for information about types of data.
z If you have selected [days] for the display period, this is
not set.
8
9
Select the item.
z Refer to P.107 for the items you can set.
z You can select one item only.
z If you have selected [By unit] as the display method, the
items are xed so there is no need for you to set them.
9
10
Select the device name.
z You can set the device name for only one device.
z If you have selected [ItemUnts] as the display method, you
can set up to 4 device names.
10
Continued on next page
Graphing temperature changes
To Next Page
Loading...
