16
Preparations before changing settings
Preparation
Operations on this unit
Buttons and boxes (continued)
Text boxes
These are used when you need to edit some text.
Display example Explanation
The touchscreen keyboard appears when you touch the text box.
Use the touchscreen keyboard to enter the text.
Refer to “Number and letter input” (P.214) for instructions on how to enter text.
Dialogues
These are elements that appear on the screen and are mainly used for settings.
They close automatically once you have registered the settings.
Touch to close the dialogue without changing the setting.
(There may also be cases where you touch at the top right of the screen to register the setting)
Notations in this document
Menu names, screen names, etc., are shown as follows in this document.
Type Notation Example
Top menus
Screen names
Screen display items
“xxx” “Oper./Status”
“I/D unit list” screen
“Select” column, “ON/OFF”
Submenu names
Screen menu names
Button names
[xxx] [Operation/Status]
[I/D unit list]
[Operation]
To Next Page
Loading...
