Panasonic FP Series Technical Manual

Table of Contents
FP Modem-EU Technical Manual
3. Modem Control/Dial-up Connections ................................ 31
3.1 Modem Control and RS232C Interface ....................................................32
3.2 Input of AT Commands ............................................................................33
3.3 Syntax ......................................................................................................34
3.4 Steps for Establishing and Terminating a Connection .............................35
3.4.1 Establishing a Connection........................................................................35
3.4.2 Terminating a Connection ........................................................................36
3.5 User Profiles and Factory Settings...........................................................37
3.6 Password Protection and Call Back Function ..........................................39
3.7 DTMF Alarm and DTMF Telecontrol ........................................................40
3.7.1 Sending a DTMF Alarm............................................................................40
3.7.2 Decoding DTMF Tones for Remote Control.............................................41
3.8 ASCII-Fax Function ..................................................................................42
3.8.1 Fax Characters (HEX) ..............................................................................43
3.8.2 ASCII-Fax Error Messages ......................................................................44
3.9 CLIP Function...........................................................................................46
3.9.1 Operation Modes......................................................................................46
3.9.2 Example Setups .......................................................................................47
ii

Panasonic FP Series Specifications

General

Mounting	DIN rail
Type	PLC
Communication Interface	RS-232, RS-485, Ethernet (depending on model)
Input Voltage	100-240V AC or 24V DC (depending on model)
Output Type	Relay, Transistor
I/O Points	Varies by model
Operating Temperature	0°C to 55°C
Dimensions	Varies by model
Weight	Varies by model