Panasonic FP Series Technical Manual

Table of Contents
FP Modem-EU Technical Manual
5. AT Commands/Registers/Modem Messages.................... 67
5.1 Command Tables.....................................................................................68
5.2 Register Settings......................................................................................75
5.3 Modem Messages ....................................................................................78
6. Remote Networking with Windows.................................... 81
6.1 Modem Setup for FP Web-Server and Windows .....................................82
6.2 Server’s Side: FP Web-Server and PLC Setup........................................83
6.3 Client’s Side: Windows Dial-up Networking Setup ...................................85
6.4 Client’s Side: Windows Dialing Procedures .............................................94
7. Glossary............................................................................... 97
7.1 Technical Terms.......................................................................................98
8. Index ................................................................................... 105
iv

Panasonic FP Series Specifications

General

Mounting	DIN rail
Type	PLC
Communication Interface	RS-232, RS-485, Ethernet (depending on model)
Input Voltage	100-240V AC or 24V DC (depending on model)
Output Type	Relay, Transistor
I/O Points	Varies by model
Operating Temperature	0°C to 55°C
Dimensions	Varies by model
Weight	Varies by model