107
9.3.6. Test 1
Item Operation Default Remarks
LED 1. Click “LED” on the main menu.
2. Click “START” on “LED” dialog box to start LED Test
continuously until clicking “STOP”.
3. Click “Close” to return to the main menu.
— Each indicator turns on or off
in a constant period.
Key / Sensor 1. Click “Key / Sensor” on the main menu.
2. Check the key and sensor status on the “Key / Sensor”
dialog box.
3. Click “Close” to return to the main menu.
—
Feed Motor 1. Click “Feed Motor” on the main menu.
2. Click “START” on the “Feed Motor” dialog box to start to
rotate Paper Feed Motor periodically controlled in the
paper-feed direction and its reverse direction until clicking
“STOP”.
Note:
• Rotating in the paper-feed direction will allow the Paper
Feed Roller Module to go down to perform the paper-feed
function.
• Rotating in the reverse direction will allow the Paper
Feed Roller Module to rise to perform the
paper-separation function.
3. Click “Close” to return to the main menu.
—
Conveyor Motor 1. Click “Conveyor Motor” on the main menu.
2. Click “START” on the “Conveyor Motor” dialog box to start
to rotate Conveyor Motor continuously until clicking “STOP”.
3. Click “Close” to return to the main menu.
—
DFP Pressure
Drive
1. Click “DFP Pressure Drive” on the main menu.
2. Click “START” on “DFP Pressure Drive” dialog box to start
to rotate DFP Pressure Motor continuously until clicking
“STOP”.
3. Click “Close” to return to the main menu.
—
To Next Page
Loading...
