Panasonic KV-S5046H - Tool

243
14.8. TOOL
Note
*1
The Bend Paper Sensor Adjustment Tool is used after Replacement of following boards. (KV-S5076H only)
CONTROL Board
BENT PAPER S(L) SENSOR Board
BENT PAPER S(R) SENSOR Board
BENT PAPER R(L) SENSOR Board
BENT PAPER R(R) SENSOR Board
RELAY USS SENSOR Board
Safety Ref. No. Part No. Part Name & Description Remarks
1 PBQX90095Z-J Test Chart A (A4) (10 Pieces)
2 PJQXC0330Z-J Shading Sheet (10 Pieces)
3 PBQX90104Z-J Test Chart A (10 Pieces)
4 PBQX90105Y-J Test Chart B (10 Pieces)
5 T4E30725-2 Polyester Tape (19mm)
6 RMA02M705-08 Eco Solder
7 PNZXS5760M
Bend Paper Sensor Adjustment Tool
*1
(KV-S5076H only)