Panasonic KV-S5046H - CIS(B) RELAY Board; Exit Roller FEED BELT & EXIT MOTOR

87
8.5.23. Exit Roller FEED BELT & EXIT MOTOR (KV-S5076H only)
8.5.24. CIS(B) RELAY Board
1. Remove the Left Cover. (See 8.5.10.)
2. Remove the Inner Cover C. (See 8.5.20.)
3. Remove the FEED BELT.
4. Remove the 2 screws which is fixing EXIT MOTOR.
5. Disconnect the EXIT MOTER connector.
1. Remove the Inner Cover C. (See 8.5.20.)