Panasonic KV-S5046H - HOPPER POSITION SENSOR Board; SKEW SENSOR (L), (R) Board

69
8.4.15. SKEW SENSOR (L), (R) Board
8.4.16. HOPPER POSITION SENSOR Board
1. Remove the Paper Feed Motor. (See 8.4.12.)
2. Remove the 2 screws.
3. Release the 2 connectors.
4. Remove SKEW SENSOR (L), (R) Board.
1. Remove the Top Cover. (See 8.4.7.)
2. Release the cable from clamper.
3. Disconnect the connector.
4. Remove the screw.
5. Remove the HOPPER POSITION SENSOR Board.