Cleaning the Scanning Backgrounds
1.
Wipe the scanning backgrounds (C , D) on each reference plate (A , B ) with the roller cleaning paper
(6HH).
•
Push E and F in the direction indicated by the arrow to rotate the reference plate on the ADF door
side. Clean both the white and black backgrounds. In the same way, push G and H in the direction
indicated by the arrow to rotate the reference plate on the main unit side to clean the white and black
backgrounds.
(E)
(F)
(G) (H)
(C)
(D)
(A)
(B)
To Next Page
Loading...
