Panasonic KV-S5046H - CIS (B) Unit; ENDING SENSOR Board

88
8.5.25. ENDING SENSOR Board
8.5.26. CIS (B) unit
2. Disconnect the 2 connectors and Flat cable.
3. Remove the 4 screws.
1. Remove the CIS(B) RELAY Board. (See 8.5.24.)
2. Remove the Discharge Brush.
3. Remove the screw, and then disconnect the connector.
1. Remove the Left Cover. (See 8.5.10.)
2. Remove the Right Cover. (See 8.5.1.)
3. Remove the Rear Cover. (See 8.3.2.)
4. Remove the 2 screws.
5. Remove CIS(B) for the front direction.