Panasonic KV-S5046H - Cleaning the Conveyor

37
Cleaning the Conveyor
1. With a soft and dry cloth, wipe off any dirt on the conveyor (A ).
(A)
2. With a soft and dry cloth, wipe off any dirt on the self-cleaning brushes (C , D ) of the reference plates
(A , B ).
• Push E and F in the direction indicated by the arrow to rotate the reference plate on the ADF door
side so that you can clean the brush. In the same way, push G and H in the direction indicated by the
arrow to rotate the reference plate on the main unit side to clean the brush.
(Ｅ)
(
C
)
(F)
(B)
(A)
(G)
(D)
(H)