30
6.6. Mechanical Deskew Mechanism (KV-S5076H only)
Deskew Correction is performed by the Drive Roller 1.
1.Detect the Skew of the document.
2.Adjust the skewed document direction by different Roller rotation speed between Left and Right Roller. (Deskew)
* Only Right Drive Roller can change its speed.
Detect the skew in documents by Waiting Sensor and Skew Sensors L/ R.
Adjust the skewed documents by changing rotation speed of Drive Roller 1 R mounted at the right side independently.
<Procedure of document adjustment by Mechanical deskew >
1.Convey the documents by Feed Roller
2.Separate each document by Separation Roller.
3.Detect the skew in documents by three sensors.
4.Adjust the skewed documents by changing rotation speed of Drive Roller 1 R
mounted at the right side independently.
* The Drive Roller 1 L keeps same rotation speed.
Skew Sensors detect the skew in documents.
To Next Page
Loading...
