Panasonic KV-S5046H - Page 90

90
8.5.27. Reference Plate (F)
1. Remove the CIS (B). (See 8.5.26.)
2. Remove the 2 springs (1 from each side of the Reference
Plate (F)).
Disassembling Note: How to remove springs
Refer to 8.4.5.
3. Release the 2 poly-sliders on both sides that fasten the
Reference Plate (F) to the scanner.
4. Remove the Gear and poly-slider.
5. Slide and remove the plate.
Reassembling Note: How to attach the spring
Refer to 8.4.5.
6. White Standard Sheet (See 8.4.5.)