Panasonic KX-NCP500 - Page 64

Numbering
Q How do I change the extension number of a wired extension?
A
• Change the extension number of the target port to the new number, and click Apply.
Next, set the port to OUS status, and then back to INS status.
Q I changed the extension number of a wired extension while the extension was
engaged in a call, but the display still shows the previous extension number.
A
• The extension number will not change while the extension is in use. When the
conversation is finished, set the port to OUS status, and then back to INS status.
Q How do I change the extension numbering plan from 3-digit numbers to 4-digit
numbers?
A
• Perform the following steps:
1. Open the 4.9 [2-6-1] Numbering Plan—Main screen.
2. Enter a 2-digit number in Leading Number, or change No. of Additional
Digits from "x" to "xx".
For more details, see What is the procedure to modify the Numbering Plan?
in Numbering.
Q How do I set a 3-digit numbering plan?
A
• There are 2 methods of creating a 3-digit numbering plan, using 4.9 [2-6-1]
Numbering Plan—Main:
1. Set the leading number to be 2 digits, with one additional digit. This method allows
a maximum of 10 extensions.
Example: Leading Number = 10; No. of Additional Digits = x
In this example, extension numbers 100 to 109 can be used.
2. Set the leading number to be one digit, with 2 additional digits. This method allows
a maximum of 100 extensions.
Example: Leading Number = 1; No. of Additional Digits = xx
In this example, extension numbers 100 to 199 can be used.
For more details, see What is the procedure to modify the Numbering Plan? in
Numbering.
Q What is the procedure to modify the Numbering Plan?
64 PC Programming Manual Document Version 2009-12
2.7.1 Frequently Asked Questions (FAQ)