Panasonic KX-NS Series Installation Manual

KX-NT265 (Software version 2.00 or later only)
To set the DS field value
To start programming
Press PROGRAM while
"Searching" is displayed.
Press VOLUME to
select "QoS".
Press SP-PHONE. Press VOLUME to
select "Diffserv".
Press SP-PHONE.
To end programming
Press STORE.
HOLD
Press VOLUME to
select "DS (Enable)".
Press SP-PHONE.
Diffserv
0.0–7.7
Press SP-PHONE.
Press HOLD until the
Menu screen is displayed
The IP-PT will reboot
and can then be
registered to the PBX.
212 Installation Manual Document Version 2016-03
5.7.4 Setting Diffserv Parameters

Panasonic KX-NS Series Specifications

General

Brand	Panasonic
Model	KX-NS Series
Category	PBX
Language	English