Version 7.11
22 | Programmable Outputs
Digiplex EVO • Programming Guide
004 Non-reportable event 000
Smoke detector reset 001 001
Arm with no entry delay 002 002
Arm in Stay mode 003 003
Arm in Away mode 004 004
Full arm when in Stay mode 005 005
Voice module access 006 006
Remote control access 007 007
Pc fail to communicate 008 008
Midnight 009 009
Neware user login 010 010
Neware user logout 011 011
User initiated call-up 012 012
Force answer 013 013
Force hangup 014 014
Future use 015 015
Auxiliary output manually activated 016 016
Auxiliary output manually deactivated 017 017
Voice reporting failed 018 018
FTC restore 019 019
Software access (VDMP3, IP Module, Neware, BabyWare) 020 020
IPR512 1 Registration Status 021 021
IPR512 2 registration status 022 022
IPR512 3 registration status 023 023
IPR512 4 registration status 024 024
255 Any non-reportable event Not Used Not Used
005 User code entered on keypad
000 User codes 000 to 255 000 to 255 000 to 255
001 User codes 256 to 511 000 to 255 000 to 255
002 User codes 512 to 767 000 to 255 000 to 255
003 User codes 768 to 999 000 to 231 000 to 231
255 Any user code Not Used Not Used
006 User/card access on door
000 Door numbers 001 to 032 001 to 032
255 Any door number Not Used Not Used
007 Bypass programming access
000 One-touch bypass programming 000 000
000 User codes 001 to 255 001 to 255 001 to 255
001 User codes 256 to 511 000 to 255 000 to 255
002 User codes 512 to 767 000 to 255 000 to 255
003 User codes 768 to 999 000 to 231 000 to 231
255 Any user code Not Used Not Used
008 TX delay zone alarm
000 Zone numbers 001 to 192 001 to 192
255 Any zone number Not Used Not Used
009 Arming with master
000 User codes 001 to 255 001 to 255 001 to 255
001 User codes 256 to 511 000 to 255 000 to 255
002 User codes 512 to 767 000 to 255 000 to 255
003 User codes 768 to 999 000 to 231 000 to 231
255 Any user code Not Used Not Used
Table 16: List of Event and Feature Groups (Continued)
A
Event Group
Event
B
Feature Group
Feature
C
Start #
D
End #