Version 7.11
Partition Timer Settings | 53
Partition One-touch Options
WARNING: If a keypad is assigned to more than one partition, the one-touch feature must be enabled in all the keypad’s assigned partitions. For instance, to enable the one-touch Regular Arming feature
of a keypad assigned to partitions 1, 2, and 5, enable option 1 of sections [3125], [3225], and [3525].
Partition Special Options
Partition Arming/Disarming Event Call Direction
Table 48: Description of Partition One-Touch Options
Option
Description
Partition 1
[3125]
Partition 2
[3225]
Partition 3
[3325]
Partition 4
[3425]
Partition 5
[3525]
Partition 6
[3625]
Partition 7
[3725]
Partition 8
[3825]
OFF ON OFF ON OFF ON OFF ON OFF OFF ON ON ON ON ON ON
1One-touch regular arming
2 One-touch Stay arming
3One-touch Instant arming
4 One-touch Force arming
5 One-touch Stay or Instant disarming
6 One-touch bypass programming
7 One-touch event display
8 No exit delay when arming with remote control
= Default
Table 49: Description of Partition Special Options
Option
Description
Partition 1
[3126]
Partition 2
[3226]
Partition 3
[3326]
Partition 4
[3426]
Partition 5
[3526]
Partition 6
[3626]
Partition 7
[3726]
Partition 8
[3826]
OFF ON OFF ON OFF ON OFF ON OFF OFF ON ON ON ON ON ON
1 Intellizone delay
2 Intellizone double knockout and zone crossing
3 Intellizone zone crossing
4Auto-force on Stay arming
5 Police code is generated on zone crossing only
6 Future use
----------------
7 Future use
----------------
8 Future use
----------------
= Default
Table 50: Description of Partition Arming/Disarming Event Call Direction
Option
Description
Partition 1
[3127]
Partition 2
[3227]
Partition 3
[3327]
Partition 4
[3427]
Partition 5
[3527]
Partition 6
[3627]
Partition 7
[3727]
Partition 8
[3827]
OFF ON OFF ON OFF ON OFF ON OFF OFF ON ON ON ON ON ON
1 Call telephone number 1/IP receiver 1
2 Call telephone number 2/IP receiver 2
3 Call telephone number 3/IP receiver 3
4 Call telephone number 4/IP receiver 4
5 Backup on telephone number 1/IP receiver 1
6 Backup on telephone number 2/IP receiver 2
7 Backup on telephone number 3/IP receiver 3
8 Backup on telephone number 4/IP receiver 4
= Default
To Next Page
Loading...
