PAX S80 - Tip Report

Chapter 6
How to Setup the POS terminal
NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be
duplicated, published, or disclosed without prior written permission from PAX.
. 117
6.3.5 Tip Report
Note
The Tip Report can be printed for all servers or it can be printed for a
specific server. This report lists all tips entered for each transaction and
includes a blank line where cash tips can be entered and a signature
line for the server to confirm.
STEP
ACTION
DISPLAY
1.
From the Reports menu, press [5] to select Tip
Report
2.
If Clerk/Server mode is enabled, terminal prompts
All or Specific clerk/server. Otherwise, skip to Step
4.
Press [1] for all servers
OR
Press [2] for a specific server.
3.
If a specific clerk/server is selected, terminal
prompts for clerk/server ID. Otherwise, skip to Step
4.
Enter clerk/server ID then press [ENTER].
4.
Use the [▲] & [▼] keys to scroll through the EDC
Type options then press [ENTER] to select.
OR
Press the number corresponding with your
selection
5.
Scroll through the Card Type options then press
[ENTER] to select.
OR
Press the number corresponding with your
selection
REPORTS:
2. Current Report
3. History Report
4. Display Trans.
5. Tip Report
SELECT PMT TYPE:
1. ALL
2. CREDIT
3. DEBIT
4. EBT
.
ENTER CARD TYPE:
1. ALL
2. Visa
3. MasterCard
4. AMEX
SELECT CLERK
1. ALL
2. Spec. Servr/Clerk
____________________
ENTER CLERK ID:
____________________