PAX S80 - Database; Void

Chapter 6
How to Setup the POS terminal
NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be
duplicated, published, or disclosed without prior written permission from PAX.
. 189
6.7.5 Database
This sub-menu has three options:
MENU
DESCRIPTION
 Void
 Post Auth
 Clear Database
 Clear Reversal
6.7.6.1 Void
Note
The Void sub-menu under Edit Database is an easy way to void
transactions. All the void transactions will behave as manually entered
void transactions.
Example: I need to void transactions 1 through 14. This can be done
quickly by using the Edit Database function.
If it is not necessary to have a Void Receipt for all of the transactions,
put the terminal in No Paper Mode. Remember to disable NPM after all
of the transactions have been voided.
STEP
ACTION
DISPLAY
1.
From the System Settings menu, press [5] for Edit
Database.
2.
Input the Password and Press [ENTER]
3.
Press [1] for void transactions
4.
When the void is not supported or is disabled.
Else go next step.
SYSTEM OPTIONS:
3. Working Mode
4. Pre-Dial Call
5. Database
6. Pin Pad Settings
EDIT DATABASE:
1. Void
2. Post Auth
3. Clear Database
4. Clear Reversal
ENTER PASSWORD:
NOT AVAILABLE